Skip to content
Back to lessons

7. · 5 min

Corners on a 4x4

Lesson overview
  • Solve 4x4 corners with the Old Pochmann you already know
  • Say what the corner swap does to wings on a 4x4
  • Trace 4x4 corners from the UBL buffer

Builds on: Wings: r2, and how it differs from M2

Before you start
  • Old Pochmann corners use the buffer UBL, and every setup, swap and undo turns outer faces only.
  • On a 3x3 the corner swap also swaps the UB and UL edges, which cancels in pairs.

Good news: you already know how to solve these. A 4x4's corners are exactly a 3x3's corners, and Old Pochmann turns only outer faces, so every setup, the swap and every undo work unchanged.

Same buffer, same setups

The buffer is UBL and the swap slot is RDF, as before. Here's a target with a setup, on a 4x4:

Loading the 4x4…

What the swap does to wings

On a 3x3, the corner swap also swaps the UB and UL edges. A 4x4 has no single UB edge: it has two wings there, and two on UL. So on a 4x4 the corner swap swaps the pair of wings on UB with the pair on UL. Watch the lit wings on the U face in the shot above.

Like on a 3x3, that cancels when the corner targets come in pairs. After an odd number, the corners are solved and those two pairs of wings are left swapped. Lesson 8 fixes that.

The swap also moves some x-centres, but only between slots of the same face. Your centres are solved by the time you do corners, so nothing you can see changes.

Trace them

Corners are traced exactly as on a 3x3, from the cube held the way it was scrambled. Twisted corners are traced as targets, as Old Pochmann always does.

Loading the 4x4…

Checkpoint: Trace 4x4 corners

Loading the cube…

How should lessons talk to you?

Pick a voice. The facts are the same in every one, and you can switch any time from the lesson header or Settings.

A local-only cubing workbench.Small steps. Deeper understanding.Contact · Privacy